How To Handle Service Faults In Volleyball?

Micah Drews


On a rectangular court, volleyball is typically played by two teams of six players. Grounding the ball on the other team’s court is the main objective of the game, as is preventing the other team from doing the same.

Serving, spiking, and setting are all methods of scoring points in volleyball. Despite this, service faults can occur frequently, causing frustration for both teams and disrupting the flow of the game. It can happen when a player touches the net, double-hits the ball, or serves the ball into the net. Even though service faults are frustrating, they are also a part of the game.

Whenever a service fault occurs while playing volleyball, remain calm and correct it as soon as possible. The game is full of service faults and everyone makes them from time to time.

A volleyball possession is not complete without a service. It is also called a foot fault when a player crosses the line as they attempt to serve. It can also be called a service fault when the ball does not reach the net above it after being served.

During a serve, a player commits a foot fault if he or she steps on the line or crosses it. Foot faults usually result in the opposing team gaining possession and gaining a point. It is customary for the referee to raise both hands and both palms in the air when a team is screened during a serving game.

When a joust occurs, the game continues as if it were in progress. Taking assistance from a fellow player or structure to make a play on the ball is not acceptable in volleyball. It is possible for a teammate to stop or hold back a player who is about to commit a fault.

How Many Service Faults Are There In Volleyball?

How To Handle Service Faults In Volleyball

The total number of service faults that can be committed by a player in volleyball is 12. You can commit these errors by stepping on or over the service line, serving the ball before another player touches it, or not completing the service motion in a reasonable amount of time. In a single game, a player who commits two or more service faults will be disqualified.

As a contact sport, volleyball requires refs to ensure fair play between both teams. It is against the rules for players to make contact with the ball twice in succession, except when blocking. Therefore, the player must wait at least one second between when they touch the ball and when they hear it. Each volleyball serve has a different set of rules.

Underhand serves, for example, are slower serves that set up attacks, while overhand serves are faster serves that finish attacks. The purpose of float serves is to surprise your opponent by shifting their direction unexpectedly. When topspin serves are used, their opponents are forced to react quickly, allowing them to set up attacks.

The jump serve, which comes from a high position, surprises the opponent. It is your responsibility as a coach to teach your players how to serve correctly. In addition to executing these plays more effectively, your players will be able to surprise their opponents with unexpected attacks.

You may enjoy reading Types of Serves in Volleyball

What are three service faults in volleyball?

How To Handle Service Faults In Volleyball

The most common service faults in volleyball are:

Foot fault

When the server steps over or on the back line while serving the ball, he commits a foot fault.

Double hit

A server hits the ball twice immediately after hitting it once.

Touching the net

Touching the net with any part of the body while the ball is in play is a fault.

Volleyball’s Four Main Faults

A serve that steps on or over the line, a serve that does not pass over the net successfully, a hit that is hit illegally (carrying, palming, throwing, etc.) and a touch of the net with any part of your body while the ball is in play are the four major mistakes of the game.

What Are The Serving Rules In Volleyball?

How To Handle Service Faults In Volleyball

The serving rules in volleyball require that the ball be served over the net to the opponent’s court from behind the end line. It is necessary for the opponent to be able to clearly see the ball before it is served. The ball may not be served twice in a row by the same player. As soon as the server has served, the next player in line must rotate to the back of the court.

Each rally begins with the ball being served to an offensive player. Whenever the receiving team does not receive the ball on a serve, the serving team receives a point. Behind the end line is the service area, which measures about ten feet long by ten feet wide.

When a line serve is hit to the sideline, the defense must run to retrieve it. It is difficult to receive a serve when it hits topspin because it generates enough power. Outs are serves that do not reach the net or land in bounds.

Volleyball rules permit the server to serve the ball anywhere behind the back line (end line). Side-outs are awarded to the other team when the server is unable to step on or over the line. In order to prevent an opposing team from scoring a point, the server must return the ball very carefully.

A ball that has crossed the net must be returned to the court by the server. Therefore, forearm passes must be used by the server, since they are the most efficient. When returning the ball, the server does not need to use one arm, and to push the ball over the net, they can also use their bodies.

During our volleyball game, cross the end line with one foot. Now that you can move around the court more freely, the ball will not be returned differently. The best part of playing volleyball is that you can serve without making any mistakes while keeping a steady hand.

Common Faults In Volleyball

How To Handle Service Faults In Volleyball

Many common volleyball errors can be caused by common faults. When attacking the ball, one of the mistakes is not using the proper footwork. Blocking without keeping the arms extended is another fault. The third mistake is not following through on serves. It is possible to correct all of these mistakes with proper practice and attention to detail.

Service Over In Volleyball

The importance of service in volleyball cannot be overstated. Having a good service can put your team in a good position to score. An easy point can be given away by a bad service. As well as putting pressure on the other team, service is also an effective way to win. The other team will have a hard time scoring points if you serve the ball well.

You may enjoy reading Best Volleyball Serving Machines

Is Dig A Fault In Volleyball?

How To Handle Service Faults In Volleyball

This question is not definitive because it depends on how the rules are interpreted. There are people who argue that digging is not a fault as long as the ball is not touched by the player before it crosses the net, whereas others argue that any contact with the ball before it crosses the net is a fault. The referee is ultimately responsible for determining whether a player has committed a foul.

Improving service by setting realistic goals

Setting realistic goals for yourself is crucial to improving serving skills. In order to stay motivated and focused on their improvement journey, players should establish both short- and long-term objectives.

Using a variety of serving techniques

Serving techniques should be varied to keep opponents guessing and make serves more difficult to predict and return. It is best for players to experiment with different types of serves, such as topspin serves and float serves, in order to keep their opponents on their toes.

Blocking Faults In Volleyball

How To Handle Service Faults In Volleyball

Blocking errors have occurred as a result of the libero’s and back row players’ inability to perform the same block individually or collectively. Blockers cross their opponent’s space when they block. During a blocking session, this is the most common fault, and it can also occur if the blocker touches the net.

An incorrect ruling was made after a volleyball player attempted a legal block. After attempting to jump the net but failing to execute properly, the player missed the net. Poor blocking can result in a goal being scored if the opposing player has a free shot on goal.

Make sure you are aware of your surroundings so you don’t overlook any legal blocks. An opposing team scores if a blocking error occurs in volleyball. Making a mistake can cost you the game when it comes to keeping track of your team’s positioning during this sport. When the referee calls a foul on a player for blocking an opponent, it is considered a blocking error.

Blocking errors often involve net violations, such as fouling in the opponent’s half or blocking too close to the ball. The term illegal screen refers to a player crossing their own center line or touching another player’s body (also known as a Body Contact foul).

There are two types of blocking in volleyball: offensive and defensive. You must be always in front of your blocker if you want to block someone.

It is ideal for an ace when an antenna blocks the ball before it hits the ground. By lifting blocks, you can transport large objects safely without using heavy machinery, in addition to reducing the risk of injury. As a small token of appreciation, players receive a dime during each game. The umpire’s perspective on tennis is unique.

Faults that can cause your team to lose

Your team can lose six out of six blocking faults. Blockers should avoid swinging their arms into the net to avoid attempting to hit it. Jump with strong hands and spread your fingers out. You must have a blocking strategy and keep your team focused on your goal during the game.


How common are service faults in volleyball?

With the right technique and practice, service faults can be minimized, even among experienced players.

What should I do if I keep committing service faults during matches?

Keep calm and adjust your technique as needed. Advice tailored to your needs can be obtained from your coach.

Can mental strategies really help overcome service faults?

Players can stay focused and confident during serving by using mental strategies such as visualization and positive self-talk.

Is it normal to feel discouraged after committing service faults?

Feeling frustrated is normal, but mistakes are part of the learning process. Make the most of them by taking advantage of them.

How long does it take to improve serving accuracy?

A consistent effort and dedication are the keys to improving serving accuracy, regardless of skill level and practice frequency.


Technical skill, mental toughness, and strategic thinking are all essential for handling service faults in volleyball. It is possible for players to minimize errors and become more effective servers by implementing the strategies outlined in this article and remaining committed to improving. Keep practicing and stay focused on your goals, so consistency and confidence are key.

You may enjoy reading What is a Tip in Volleyball?

About Micah Drews

After playing volleyball at an international level for several years, I now work out and write for Volleyball Blaze. Creating unique and insightful perspectives through my experience and knowledge is one of my top priorities.

Leave a Comment